Everyone knows that blind rivet nut has a wide range of applications, so naturally, there are many types and many functions.
The main function of the rivet nut is the connection of the plates. The rivet nut can be decorated on a single thin plate, or two thin plates can be riveted together. It is both a rivet and a rivet nut. It is also suitable for closed-shaped workpieces that can only be operated on one side. Also, for workpieces that require screw and animal connection with curved light metal materials, the steel rivet nut is a screw sleeve with a compact structure and convenient use. Beautiful appearance and easy to use, it is a low-consumption and high-efficiency fastener product for sheet metal rivet nuts.
Rivet nuts can be widely used on aluminum alloy substrates with different thicknesses or steel plates with thicknesses of 1-2.5mm. Especially the connection of steel rivet nuts to aluminum alloy components eliminates the cumbersomeness of embedding steel plates inside, and its manufacturability is significantly improved.
Many rivet nuts have their unique advantages, such as countersunk head rivet nut has its functions and advantages.www.khfastener.com

Material Advantages Of Stainless Steel Rivet Nutsening effect of the rivet nut. Can solve the problem of anti-loosening of studs and screws.
Of course, in addition to these nutst stainless steel rivet nut .
The stainless steel rivet nut, as its name implies, is a rivet nut made of stainless steel, which can also be called a stainless steel rivet nut or a pull cap. It is used in the fastening field of high-end industries such as various metal plates and pipes. It is widely used in high-end electromechanical equipment such as high-speed rail, high-speed rail screen doors, photovoltaic solar energy, electronic communication equipment, aviation, refrigeration, elevators, switches, instruments, furniture, decorations, etc. And the assembly of light industrial products.
The basic purpose of stainless steel rivet nut is the same as that of carbon steel rivet nut. The biggest advantage is that it is made of 304, 302, 316, and other high-quality stainless steel materials. However, its good rust resistance is unmatched by carbon steel materials, and it also has certain advantages in environmental protection.
As excellent as the stainless steel rivet nut, there is also the rivet nut aluminium , which is very good in terms of use, materials, and finished products. Material Advantages Of Stainless Steel Rivet Nut.www.khfastener.com

There are many types of rivet nuts we can see, and there are also many types of classification methods and categories. However, there are two main categories, blind rivet nuts, and blind rivet nuts.Today we will take a look at the half hex rivet nut in the rivet nut.
Like other rivet nuts, half-hexagonal rivet nuts can provide fast, reliable, and low-cost connections, with strong load-bearing capacity, installation, and connection methods, without damaging the working surface, coating, and not easy to deform. It has the functions of anti-corrosion, anti-deformation, anti-rotation, high connection strength, wide selection range, and wide riveting range.
The product is flexible in application, beautiful and stable, and has a series of specifications. Its performance is better than welding nuts, self-tapping nuts, traditional nuts, and bolts. Single-sided riveting is an excellent solution for riveting middle hole frames, shells, pipes, profiles, or sealing components. Ensure that the internal thread after installation is firm and durable. Can be used with bolts. It also has a rivet function, which can rivet thin plates together.
Although there is only one difference between the hex rivet nut and the half hex rivet nut, and no matter the material or the other is also very similar, there are still differences between the two, so remember not to choose the wrong one when choosing.www.khfastener.com

The Cost Of Knurled Rivet Nut
knurled rivet nut custom rivet nut

Rivet nuts are the most commonly used material among hardware materials, and they are also called blind rivet nuts, and they often appear in various metal materials. The main function is to be used for bone and bone materials, and it is also to solve the easy welding deformation of the base material when used, and to solve the shortcomings of the internal thread easy to slip teeth. It is very fixed when the material is locked, and it is also very convenient to use and relatively storage. Convenience is one of the most important hardware materials for production and industrial use, and the knurled rivet nut is one of the rivet nuts.
The low cost of nuts is due to the production of special equipment. The main production process of nuts is cold heading and tapping. The thread of the nut is processed by a tapping machine. Nowadays, the automatic nut tapping machine is highly automated , When working, as long as the nut blank is put into the hopper, the material can be automatically fed, automatically positioned, automatically clamped, automatically tapped, and automatically unloaded. One worker can operate multiple equipment at the same time, which has high production efficiency and can significantly save labor. cost! Of course, there are also equipment that integrates cold heading and tapping, directly from wire to cold heading to tapping, but the principle is the same.
Of course, some people think that although there are many types of rivet nuts, they do not meet what they want, so at this time, some people will choose custom rivet nut . And strictly speaking, although the price of custom rivet nuts will be more expensive than ordinary rivet nuts, it can be said to be very good in terms of material and appearance. So if you think it is troublesome to choose the one that suits you from all kinds of rivet nuts, then you might as well consider looking at custom rivet nuts.www.khfastener.com

Today we discuss the installation tutorial of blind rivet nuts.
Blind rivet nut are installed on the thin plate: In the process of using blind rivet nut , although the installation method and principle have been determined, the blind rivet nut still need special screw extrusion equipment to operate, which also ensures the safety of the nuts. Blind hole nuts are installed. After installation, the vertical balance of the riveting press and the rivet nut should be maintained, and the pressure can be evenly applied.
Blind screw nut is a kind of fastener used to compress sheet metal, sheet metal, chassis and cabinet. The blind screw nut has a hexagonal shape at one end and a cylindrical shape at the other end. There is an undercut groove between the hexagonal side and the cylindrical shape. The internal shape is internal thread. Press the hexagon head into the predetermined hole of the thin plate through the press (the size of the pre-hole is usually slightly larger than the cylindrical bolt of the stud bolt), so that the periphery of the hole and the deformed part are plastically deformed and pressed into the undercut groove of the nut column. Tighten the blind hole nut and bolt on the thin plate to form an effective fixed internal thread on the thin plate. Method of Use Blind-hole nuts are usually installed on a thin plate by riveting, and a strong internal thread can be formed on the screw after being compressed. Use a torsion device to press the top down in parallel, and use the hexagonal side of the blind hole nut to engage the sheet metal to prevent slippage and movement.
Finally, I shared the installation steps of threaded rivet nuts : 1. Place the thin plate horizontally on the tool. 2. Put the nut post into the plate hole. 3. The press presses in according to the set parameters. 4. Finish and check the flatness of pressure riveting.www.khfastener.com

Rivet nuts are one of the most used materials in hardware materials. They usually appear in various metallic materials. They are mainly used for fastening materials, but they also solve the problem that the base material is prone to welding deformation over time and solve the problem of internal ribs caused by slippery teeth defects. When the material is locked, it is very fixed and easy to use and store. It is one of the most important hardware materials for production and industrial use, carbon steel rivet nut is one of them. .
At present, the standard rivet nuts on the market mainly include carbon steel, stainless steel and other materials.
The first is carbon steel. We distinguish low carbon steel, medium carbon steel, high carbon steel and alloy steel according to the carbon content of carbon steel materials.
1. Low carbon steel C%≤0.25% is usually called A3 steel in China. It is basically called 1008, 1015, 1018, 1022, etc. abroad. Mainly used for products that do not require hardness, such as grade 4.8 bolts and grade 4 nuts, small screws. (Note: 1022 material is mainly used for drill tail nails.)
2. Medium carbon steel 0.25% 3. High carbon steel C%> 0.45%. Basically not used in the market.
3. Alloy steel: Add alloying elements to ordinary carbon steel to increase some of the special properties of steel: such as 35, 40 chromium molybdenum, SCM435, 10B38. Fangsheng screws mainly use SCM435 chromium-molybdenum alloy steel, the main components are C, Si, Mn, P, S, Cr, Mo.
The second type is stainless steel. Performance grade: mainly divided into austenite (18%Cr, 8%Ni), with good heat resistance, good corrosion resistance and good weldability. A1, precision hardware, A2, A4 martensite, 13% Cr, poor corrosion resistance, high strength, moderate price, and good wear resistance. C1, C2, C4 ferritic stainless steel. 18% Cr has better creep resistance and corrosion resistance than martensite. Currently, the imported materials on the market are mainly Japanese products. According to the grade, it is mainly divided into SUS302, SUS304 and SUS316.
Both flat head rivet nut s and carbon steel rivet nuts are rivet nuts, which are good choices in terms of appearance and function. As long as there is industry on the earth, the function of fasteners will always be important.www.khfastener.com

Blind rivet nuts，also known as hex rivet nut , pull caps, instant pull caps, are used in the fastening fields of various metal plates, pipes and other manufacturing industries, and are widely used in automobiles, aviation, railways, refrigeration, elevators, switches , Instruments, furniture, decorations and other electromechanical and light industrial products.
If the nut of the product needs to be installed outside and the internal space is small, the indenter of the sub-rivet machine cannot be used for pressure riveting, and methods such as sprouting cannot meet the requirements of strength, pressure riveting and expansion riveting impossible. Blind rivets must be used. It is suitable for fixing plates and tubes of various thicknesses. It can be riveted by pneumatic or manual rivet gun at one time, which is convenient and firm. Instead of traditional weld nuts, it can make up for the shortcomings of thin metal plates, thin tubes and weld nuts.
Like other rivet nuts, half hex rivet nut can provide fast, reliable and low-cost connections, with strong load-bearing capacity, installation and connection methods, without damaging the working surface, coating and not easily deformed. It has the functions of anti-corrosion, anti-deformation, anti-rotation, high connection strength, wide selection range and wide riveting range. The product is flexible in application, beautiful and stable, and has a series of specifications. Its performance is better than welding nuts, self-tapping nuts, traditional nuts and bolts. Single-sided riveting is an excellent solution for riveting middle hole frames, shells, pipes, profiles or sealing components. Ensure that the internal thread after installation is firm and durable. Can be used with bolts. It also has a rivet function, which can rivet thin plates together. www.khfastener.com

Rivet nuts are products that we often see and often use in our daily lives. I believe everyone knows. The threaded rivet nut and the knurled rivet nut are a kind of rivet nut. Although their usage is different, they are always rivet nuts. Today, let us see what is the misunderstanding of using threaded rivet nuts?
1. The holes of the screw and nut do not match
The screws and nuts (such as drive shaft bolts, flywheel bolts) that bear the transverse load and shear force of the machine are matched with the bolt holes to achieve transitional fit. The components should be sturdy and reliable, and able to withstand lateral forces. When assembling, no one pays attention to check. When the gap between the bolt and the bolt hole is large, still choose to install. As a result, the bolt will loosen or a cutting accident will occur.
2. One female head and multiple pads for fixing screws and nuts
During the installation process, sometimes the assembled screws and nuts are too long, so someone installs many spring washers on the bolts. In this way, the spring washers will not be uniformly stressed during the curing process, and some spring washers will break, causing the bolt to be pre-tightened. The tightening force is reduced; or eccentric load is generated, which will reduce the reliability of the bolt connection.
3. Thicken nut
Some people think that thickening the nut can increase the number of working turns of the thread and improve the reliability of the connection, but this is not the case. Conversely, the thicker the nut, the more uneven the load distribution between the threads of each circle, the easier it is to loosen the connection.
The threaded rivet nuts are commonly used nuts. We will encounter some problems and troubles during use, such as the above-mentioned misunderstandings. Therefore, when using nuts, please pay attention to the specifications to minimize these misunderstandings. www.khfastener.com

knurled rivet nut is suitable for thin and soft materials. After installation, it is flat and beautiful. When the knurling on the rod directly contacts the workpiece, it begins to deform, and then slowly bulges to clamp the outer pattern of the workpiece. It is especially suitable for aluminum or plastic parts or uneven surfaces.
(1) Light weight, not easy to deform, strong corrosion resistance, serialized specifications, of course, you can also choose to customize.
(2) Single-sided riveting is an excellent solution for riveting middle hole frames, shells, pipes, profiles or sealing components. After riveting, it has extremely high torsional strength.
(3) Pure mechanical fastening, small deformation of the workpiece, and no damage to the surface treatment of the riveted workpiece.
(4) Fast installation and low cost.
(5) It can be reused safely without affecting performance.
Note: The product needs to punch the corresponding counterbore on the board plane. The counterbore should be able to ensure that the head of the rivet nut is exposed at a safe height of 0.1mm to ensure the correct use of the rivet nut. Suitable for thinner and softer materials.
Product installation method: Put the product into the pre-punched or drilled installation hole, and apply a pulling force to the product according to the standard installation force to install the product in place.
The scope of application of the product: lighter electromechanical assembly such as automobiles, aviation, mechanical equipment, railways, instruments, furniture, etc.
For more details, please contact：threaded rivet nuts .

Pressure riveting nuts, cylindrical nuts, screws and bolts of standard parts are essential in daily life and industrial production. Pressure riveting screws, studs, nuts and bolts are also called industrial instruments. Standard parts play an important role in the industry. As long as there is industry, the use of fasteners is always very important. For example: Carbon Steel Rivet Nuts and Knurled Rivet Nuts.
Pressure riveting nuts, nut posts, screws and bolts of standard parts are usually used to process different materials according to the strength grades of the nut posts, nuts, screws and bolts. Currently, the standard parts on the market mainly include carbon steel, stainless steel and copper.
Carbon steel is an iron-carbon alloy with a carbon content Wc of less than 2.11%. Also called carbon steel. Usually, it also contains small amounts of silicon, manganese, sulfur and phosphorus. Generally, the higher the carbon content of carbon steel, the higher the hardness and the higher the strength, but the lower the plasticity.
{1}According to the application, carbon steel can be divided into three types: carbon structural steel, carbon tool steel and free-cutting structural steel. Carbon structural steel is divided into engineering structural steel and mechanical manufacturing structural steel.
{2} According to the smelting method, it can be divided into open hearth steel and converter steel.
{3} According to the deoxidation method, it can be divided into boiling steel, killed steel, semi-killed steel and special killed steel;
{4} According to the carbon content, carbon steel can be divided into low carbon steel (WC≤0.25%), medium carbon steel (WC0.25%-0.6%) and high carbon steel (WC> 0.6%);
{5}According to the quality of steel, carbon steel can be divided into ordinary carbon steel (high phosphorus and sulfur), high quality carbon steel (low phosphorus and sulfur) and high quality high carbon steel (low phosphorus and sulfur)) and super high quality steel.
Carbon steel: We distinguish low carbon steel, medium carbon steel, high carbon steel and alloy steel according to the carbon content of carbon steel materials.
(1) Low carbon steel with C%≤0.25% is usually called A3 steel in China. It is basically called 1008, 1015, 1018, 1022, etc. abroad. Mainly used for grade 4.8 bolts, grade 4 nuts, small screws and other products without hardness requirements. (Note: Drilling nails mainly use 1022 material)
Dongguan Rosenton Hardware Technology Co., Ltd. mainly uses 1008 1006 1022 raw materials for pressure riveting screws, nuts, studs and bolts. SAE1008 is a standard of the American Society of Automotive Engineers. 10 means Mn is less than 1%, and 08 means carbon content. The main difference between 1008 and 1006 and 1010 is the carbon content. SAE is the American steel grade representation method.
According to the results of the existing data query, the main differences between chemical composition 1006 and 1008 are:
{a}The carbon content is inconsistent: the carbon content of 1006 is less than 0.08, and the carbon content of 1008 is less than 0.10
{b}The manganese content is inconsistent: the manganese content of 1006 is less than 0.45, while the manganese content of 1008 is less than 0.50
(2) Medium carbon steel, product p is 0.25%

The mold used for plastic injection molding becomes an injection mold, and the injection mold can mold plastic products with complex shapes, precise dimensions, or with inserts at one time. Injection mold is a tool for producing plastic products; it is also a tool for giving plastic products a complete structure and precise dimensions. Its essence is to inject the plastic melted by heat into the mold cavity at high pressure by the injection molding machine, and after cooling and solidification, the molded product is obtained.
Injection molds are divided into thermosetting plastic molds and thermoplastic plastic molds according to the molding characteristics; according to the molding process, they are divided into transfer molds, blow molds, casting molds, thermoforming molds, hot press molds (compression molds), injection molds, etc. , Among them, the hot press mold can be divided into three types: overflow, semi-overflow, and non-overflow. The injection mold can be divided into two types: cold runner mold and hot runner mold based on the pouring system; It can be divided into two types: mobile type and fixed type. According to the molding materials, it can be divided into metal molds and non-metal molds: according to the production volume, it is divided into sample molds (simple molds) and mass production molds.
The mold is mainly composed of a pouring system, a temperature control system, forming parts and structural parts. Among them, the pouring system and the molded parts are the parts that are in direct contact with the plastic, and change with the plastic and the product. They are the most complex and the most variable parts in the plastic mold, requiring the highest processing finish and precision.
The injection mold is composed of a movable mold and a fixed mold. The movable mold is installed on the movable template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine.
Taizhou Saiweiyue Molding is a supplier of injection molds. For more information, please contact: Injection Mould Manufacturers

The mold used for plastic injection molding becomes an injection mold, and the injection mold can mold plastic products with complex shapes, precise dimensions, or with inserts at one time. Injection mold is a tool for producing plastic products; it is also a tool for giving plastic products a complete structure and precise dimensions. Its essence is to inject the plastic melted by heat into the mold cavity at high pressure by the injection molding machine, and after cooling and solidification, the molded product is obtained.
Injection molds are divided into thermosetting plastic molds and thermoplastic plastic molds according to the molding characteristics; according to the molding process, they are divided into transfer molds, blow molds, casting molds, thermoforming molds, hot press molds (compression molds), injection molds, etc. , Among them, the hot press mold can be divided into three types: overflow, semi-overflow, and non-overflow. The injection mold can be divided into two types: cold runner mold and hot runner mold based on the pouring system; It can be divided into two types: mobile type and fixed type. According to the molding materials, it can be divided into metal molds and non-metal molds: according to the production volume, it is divided into sample molds (simple molds) and mass production molds.
The mold is mainly composed of a pouring system, a temperature control system, forming parts and structural parts. Among them, the pouring system and the molded parts are the parts that are in direct contact with the plastic, and change with the plastic and the product. They are the most complex and the most variable parts in the plastic mold, requiring the highest processing finish and precision.
The injection mold is composed of a movable mold and a fixed mold. The movable mold is installed on the movable template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine.
Taizhou Saiweiyue Molding is a supplier of injection molds. For more information, please contact: Injection Mould Manufacturers

Pressure riveting nuts are divided into Countersunk Head Rivet Nut, stainless steel rivet nuts, aluminum rivet nuts, plated rivet nuts, aluminum rivet nuts and other types of nut materials from the material, which should be used in different ring environments. The specifications are usually from M2 to M12. There is no unified national standard for pressure riveting nuts, and they are often used in the cabinet, sheet metal industry.
Compression riveting nut is also called riveting nut, self-fastening nut, which is a kind of nut applied to metal instrument or thin plate. The principle is to press the embossing teeth into the preset holes of the sheet metal. Generally, the aperture of the square preset holes is slightly smaller than the embossing teeth of the pressure riveting nut. The flower teeth of the pressure riveting nut are forced into the plate by pressure. The periphery of the hole is plastically deformed, and the deformation is squeezed into the guide groove, which produces a locking effect and is not easy to fall off. It is mostly used on metals that require high fastening.
Pressure riveting nuts are divided into quick-cutting steel pressure riveting nuts s type, stainless steel pressure riveting nuts CLS type, stainless steel pressure riveting nuts SP type and copper and aluminum suppression nuts CLA type，There are also Hex Rivet Nut,etc. They should be used in different ring environments. The specifications are usually from M2 to M12. There is no unified national standard for pressure riveting nuts, and they are often used in the cabinet, sheet metal industry.
Advantages of nut application:
1. High torque resistance.
2. The specifications are serialized to meet a variety of design requirements.
3. Keep the back of the board completely flat.
4. Small and exquisite, suitable for all electronic or precision equipment.
5. Convenient equipment, just simple pressure riveting.
HAINING R-BEST HARDWARE is a Threaded Rivet Nuts & Stud Supplier. For details, please contact: Threaded Rivet Nuts.

Pressure riveting nuts are divided into Countersunk Head Rivet Nut, stainless steel rivet nuts, aluminum rivet nuts, plated rivet nuts, aluminum rivet nuts and other types of nut materials from the material, which should be used in different ring environments. The specifications are usually from M2 to M12. There is no unified national standard for pressure riveting nuts, and they are often used in the cabinet, sheet metal industry.
Compression riveting nut is also called riveting nut, self-fastening nut, which is a kind of nut applied to metal instrument or thin plate. The principle is to press the embossing teeth into the preset holes of the sheet metal. Generally, the aperture of the square preset holes is slightly smaller than the embossing teeth of the pressure riveting nut. The flower teeth of the pressure riveting nut are forced into the plate by pressure. The periphery of the hole is plastically deformed, and the deformation is squeezed into the guide groove, which produces a locking effect and is not easy to fall off. It is mostly used on metals that require high fastening.
Pressure riveting nuts are divided into quick-cutting steel pressure riveting nuts s type, stainless steel pressure riveting nuts CLS type, stainless steel pressure riveting nuts SP type and copper and aluminum suppression nuts CLA type，There are also Hex Rivet Nut,etc. They should be used in different ring environments. The specifications are usually from M2 to M12. There is no unified national standard for pressure riveting nuts, and they are often used in the cabinet, sheet metal industry.
Advantages of nut application:
1. High torque resistance.
2. The specifications are serialized to meet a variety of design requirements.
3. Keep the back of the board completely flat.
4. Small and exquisite, suitable for all electronic or precision equipment.
5. Convenient equipment, just simple pressure riveting.
HAINING R-BEST HARDWARE is a Threaded Rivet Nuts & Stud Supplier. For details, please contact: Threaded Rivet Nuts.